Product Introduction
Steel Welded Mesh, Which is the most advance form of concrete reinforcement available today. It is especially suitable for reinforcement of concrete floor slabs, concrete roads, concrete drains, shear walls, retaining walls, precast concrete components for anti crack purposes.
Manufacturing Process
welded wire mesh is manufactured with high strength cold rolled coil longitudinal and cross wires which are electrically resistance welded together by either by square or rectangular grids on a continue automatic welder.
The electronically controlled welding process employs the fusion of pressure, which combines the intersecting wires into a homgenous section without loosing the strength or area.
Quality
Where by the strength of welded wire mesh must achieve at least 50% of the specified characteristic strength. It can be complies with international standard requirements.
Advantage of Using Welded Wire Mesh
The economical and technical advantages of using are:
1. Cost and Time Saved.
It saves the time in sorting, cutting, spacing and trying of steel bars and reduces labor cost.
2. Material Saving.
Wastage will be eliminated with the use of cut-to-size welded wire mesh. The usage of conventional steel bars usually entail 5% or more of wastage, depending of the level of supervision and control. With a characteristic yield strength of 485 N/mm2 which is superior than normal steel bars, thus, less steel will be used in order to achieve the same strength.
3. Easy Handling.
Welded wire mesh can be pre-stored at our factory before supplying to the site as they can be hoisted onto the form work for laying. It is convenient for sites with space constraint.
4. Adaptability.
Welded wire mesh can easily bent upon required form and maintain its shape through out.
5. Controlled Quality.
The hard drawn wires are thoroughly processed to attain perfect roundness and consistent quality. In addition, the fabrication process is well-controlled to achieve consistency and accuracy in wire spacing. Laboratory is conducted regularly to ensure good quality products and strict adherence to standard required.
6. Good Anchorage and Crack Control.
The welded intersections of welded wire mesh provide basic anchorage and further higher level of bonding is obtained by the positive of rib profile on the wire. This will control and limit any development of crack line due to its close and consistent spacing of smaller wires.
7. We are able to customize.
Your order and "cut to size" in accordance to your requirements.